Winterizing can increase value and efficiency of your house

Cold winds and temperatures might have snuck up on some people this year before they could take appropriate measures to winterize their homes.

Making small adjustments in the home can lead to energy savings and lower utility bills through the winter months, according to Bruce Snead, director of Engineering Extension at Kansas State University.

Finding a balance between being comfortable and conserving energy is key, Snead said.

Some key areas of concentration for winterizing the home include checking the furnace, insulation, and the windows, doors and outlets for leaks to the outdoors.

But having a working programmable thermostat might be the first item on the agenda.

?The thermostat setting determines how much you will spend for heating and cooling costs,? Snead said.

He recommends that people consider setting it down when they don?t need it, perhaps when they are sleeping or gone during the day.

?Each house is unique, but generally every degree you drop on your thermostat might save as much as 3 percent on your heating and cooling costs,? he said.

Furnace checks

Snead said the furnace, whether it is a gas, propane, heat pump or even geothermal heat pump, should be operating at optimum efficiency. This means filters should be regularly replaced or cleaned.

?The more you use the furnace, the more important it is to check it, certainly at least every three months if not more often, just to make sure that the filters are clean,? he said.

?If you have not had your furnace serviced in two or three years, it would be worth having a service technician do a standard evaluation to make sure everything is still lubricated, operating properly, venting properly and you are getting the most out of the fuel that is being consumed by the furnace to provide comfort in your home.?

If people have any combustion appliances, like a furnace, in their home, Snead said they should have a carbon monoxide detector.

Carbon monoxide is an odorless, tasteless and colorless gas that can cause flu-like symptoms or even death.

Windows, doors, outlets

Leaks to the exterior of the home are one of the largest drains on energy costs.

Snead said it depends on how many windows the home has, the orientation of those windows, how old they are, how many layers of glass they have and how tight they are.

?Even if you have leaky, old windows, you can always add an interior layer of plastic?a shrink-fit film,? Snead said. ?Just choose the proper-sized kit for your window. It can be temporarily installed. It?s a good way to maintain the clarity of view of the window, but air tightening by literally sealing the whole window at the surface of the trim.?

Another option for people is using temporary caulks, Snead said. If the window is not going to be used at all this winter, the temporary caulks don?t bond permanently to the surface but will seal around the window.

If the windows are loose-fitting or decaying because of mold, mildew or moisture, Snead said it is worth having them replaced.

?Properly installed replacement windows would be a significant upgrade in the layers of insulation,? Snead said.

?It?s not just an energy efficiency investment, but it?s also an investment in the quality and value of the home. The appearance will be better, and the maintenance will be reduced.?

People can take a similar approach for maintenance on doors. Snead said temporary caulking can be applied to doors that are not used over the winter, and if it is a sliding glass door that will not be used, shrink-fit film kits are sized to fit doors as well.

Weather-stripping doors, making sure the doors close tightly and using temporary door sweeps might also save on home energy costs.

Snead said if people have outlets on the inside surface of their outside walls, air gaps in the insulation around the electrical box in the wall might allow cold air in and warm air out.

?Put the back of your hand up to the electrical outlet on a windy day, and if you feel cool air coming in, it?s probably worth removing the cover plate, placing a foam insulator on the underside of the plate and then screwing the plate back in place,? Snead said.

Evaluating insulation

Snead said if the home has not had updates to the insulation in more than 30 years, there is no question that the insulation of that home should be checked and updated.

?You can evaluate the depth that is there and whether or not it would be warranted to add or blow additional insulation on top of that,? he said.

?One of the things that may be missed in attic insulation is the sealing of gaps and holes in the attic floor, where piping, wiring, and electrical, water and plumbing lines run. Many times this allows for air leakage.?

There are two options to consider for insulating crawl spaces?insulating the perimeter wall or insulating the underside of the floor, he said.

Insulating the perimeter wall to make the crawl space an insulated space is typically easier than insulating the underside of the floor, and is probably a better long-term strategy.

It might keep homeowners from having to do additional insulation around pipes and ducts that convey heated air or water.

Other tips

Snead recommends that people check with their utility provider to see if they have energy efficiency programs or equipment available to help save costs.

Using warmth from the sun by allowing it to shine through windows facing south, east or west might help with home heating, but Snead said make sure to close those blinds, shutters or drapes at night to minimize heat loss.

More from Hillsboro Free Press
Daily Life News (8-8-18)
Durham community burger fry Aug. 11 A community hamburger fry will be...
Read More